Category: Home Improvements

Choosing Between Tiles And Tin For Your Roofing

Every aspect of a home is important thus, it is important to decide carefully when roofing in Sydney because you have many options but the most common one is whether to choose tin or tiles. According to Chris Edgar, a member of the Master Builders Association of South Australia, there are advantages and disadvantages to the two materials.

When it comes to versatility, the steel is leading but looking at the lifespan of the material, tile is the clear winner aside from the fact that it is better in insulating sound and it has heritage appeal.

Mr. Edgar said that lightweight steels are ideal for architectural buildings because it can be formed into curves while the recommended pitch of tile is only from 18 to 22 degrees. Variance can be achieved when steel is used.

The only issue is that there is a big difference in the weight. Roof made of terracotta can be very heavy. The tiles can be as heavy as 60 kilograms for every square meter while steel only weighs five kilograms for every square meter.

Mr. Edgar said that flat roofs cost less to install but there might be problems in the future it the plumbing, wiring or the air conditioning system has to be changed. Flat roof is beautiful and it is possible but it has to be maintained more than the pitched roof because blockage can occur.

It is recommended to have at least two degrees of pitch because the curl on the edge can help in preventing the rain from coming back if it does not have enough run-off speed to begin with. On the other hand, roofs with higher pitch are more flexible.

Both tin and tiles can incorporate solar panels but the radiant heat can have an impact the panels. Tiles made of terracotta or concrete has the ability to absorb heat and as soon as the temperature drops, it sends it back out. Steel, on the other hand, lets heat pass through which is why the ceiling space can heat up a lot faster but dissipation is also quite fast.

For homeowners planning to do roofing in Sydney, make sure that you choose steel if your house is located in an area where bushfire is common.


Sumitomo Chemical Acquires Botanical Resources

Botanical Resources, an Australian firm that specializes in growing insecticidal compounds for pest control in Sydney and anywhere else in Australia,recently managed to close a deal that granted majority stockholder status to the Japan-based Sumitomo Chemical.

The Japanese company recently acquired 82.9% of Botanical Resources’ shares, in addition to also acquiring affiliated companies belonging to the BRA group from the company’s shareholders. Following this transaction, Botanical Resources, as well as the BRA Group will then operate as a consolidated subsidiary of Sumitomo Chemical.

Botanical Resources is an Ulverstone-based company founded in 1996 by Ian Folder, which he established when he spearheaded a management buyout of CIG’s pyrethrum assets. From there, the BRA Group began.

The BRA Group’s primary specialization is in the production of the insecticidal compound pyrethrin.Pyrethrin is a natural insecticide that is found in the extract of pyrethrum daisies. They function as insecticides by attacking the nervous systems of pests, whilst remaining safe to use due to being harmless to people or animals. Pyrethrin also breaks down in sunlight, making it fairly environmentally friendly as well. The BRA both processes the pyrethrum daisies and grows them in farms, located in Tasmania.

Sumitomo Chemical has recently been reported to be expanding into environmentally friendly agricultural chemicals, and this acquisition seems to part of that. The Japanese company sells its products across 80 countries, with most of its products aimed at protecting people from mosquitoes, known for carrying diseases such as dengue and malaria.

Reports from Japan suggest that the buyout will lead to Sumitomo Chemical full control of the BRA Group’s  production chain that stretches from the pyrethrum daisy farming all the way up to the finished product.  Other reports state that Sumitomo will be seeking ways on how to improve pyrethrum cultivation techniques, as well as seeking out more uses for pyrethrins.

This new collaboration will be focused on developing mixtures with existing chemicals, and creating new mixtures, whilst utilizing Sumitomo’s product line. As part of an extended deal, the two companies will continue their cooperative development programmes.

Tasmania is noted as the world’s largest producer of pryrethrins, which makes the state a key location for pest control in Sydney and the world. The state accounts for one-third of the global market at around 60%-70%. During the last harvest season, there were at least 100 growers across 1500 hectares across the state.


How To Obtain The Right Quote For Solar Panels On The Gold Coast?

Many customers residing on the Gold Coast admit they find it difficult to obtain a solar quote. It may seem uncommon for these customers to google some companies offering solar panels on the Gold Coast and get quotes over the phone. These companies found online may not be even from Queensland and will utilize subcontractors for the installation.

For those working in the area, they can actually do a free onsite quote, design and install the jobs quickly by themselves. They make it practically different from the rest of the competitors in the area.

So here are some questions you may want to ask about solar panels on the Gold Coast, specifically on installation.

  • What’s the Best Position on the Roof for Solar Panels?

For optimum performance, the best position is facing North on the roof. You can also put the solar system on the NE, NW or E + W. You can actually split the solar system for best results such as facing the Eastto absorb the morning sun and the West for the afternoon sun. Every property is designed differently and for this reason, you need to go out and get a quote.

  • What’s the best inverter?

The heart of the solar system is the inverter and for this purpose, there are two types that work well – the German manufacturer SMA as well as the Italian manufacturer Aurora.

  • What kind of warranties are there on the products and on service?

Manufacturers provide full product warranties for all the solar panels on the Gold Coast, which actually assuresowners of solar systems that it will work for severalyears.

  • Who does the paperwork?

For some solar system providers, they do all the paperwork, from the initial request through the STC form to obtain a small rebate, which is actually the discount for the installation.

  • How else can you save for your power bills?

When you request for a quote for solar panels on the Gold Coast, some can provide recommendation on how to lower your energy bills,like using energy efficient lighting, or transforming your pool to off peak or through installation of hot water using the solar panels. Thisshould however not compromise your comfort.


Effective Ways In Reducing Monthly Water Heating Bill

There are several ways on how you can help in reducing monthly water heating bill and most of these methods are practical and effective. Aside from saving money in the process, you will also help the environment with your less energy and resources consumption. Here are some ways.

  • Instead of taking long baths or extensive shower, have a quick shower to freshen up and clean yourself. Although there is nothing wrong with pampering yourself in luxurious baths, doing it every day would be time consuming and impractical.
  • Turn off the shower when soaping up, shampooing, shaving or brushing your teeth. This will not only help in reducing monthly water heating bill, you will also lower down your water consumption.
  • There are those who keep the shower on just to keep themselves warm while taking a shower during winter. However, this would mean wasting a lot of water and consuming more energy for the heater. To keep the bathroom warm as you take a shower, keep the bathroom door tightly shut but make sure to turn the fan on. It would also help if you have rich and fluffy towels or bathrobe nearby.
  • Use cold or regular water when doing the laundry instead of warm water. Although in some cases you might need warm or hot water on washing your clothes, most of the time, you would only need regular temperature to wash your laundry loads.
  • Fix the leaks and other boiler issues. A constantly dripping faucet or pipe could mean losing several gallons of water in a day and that means a lot to your consumption. To keep you water and heating facilities in tiptop condition, have a regular maintenance check by a qualified technician at least once in a year.
  • Utilize your dishwasher efficiently. Only wash your dishes when they would amount to full load. Set the washer to shorter cycles and if your dishwasher has a booster heater, use it.
  • Install a heat trap on your water heater tank as this would help in reducing monthly water heating bill effectively. Call a technician to install the heat trap.

DIY Pest Control Stresses Importance Of Product Label

One of the most common advices you will get when using pest control on your own is to read the instructions carefully and make sure to follow as directed. This is important if you opt not to hire pest control in Sydney because not following could lead to accidents. When dealing with pests, pest control companies know that putting labels is written as a law. According to the mandate, federal laws will be violated if the label of the product is false or is not the true to the actual content of the product.

The EPA was founded in 1970 and these laws were made in order to make the organization into a legal agency to campaign what they are created to implement. Two years later, they published the Federal Institute, Fungicide and Rodenticide Act which is generally made to regulate the use of pesticides for the welfare of the users and the environment as a whole.

In creating pest control products, the critical components must be listed down including the substance used to eliminate pests. There are ten major parts of a pesticide label that was highlighted by the FIFRA law including the name of the product, registration number under the federal state, safety measures, ingredients as well as directions on how to use the specific product.

When it comes to labels, it should be clearly written that it should be kept in an area where children can’t access and they should understand that it is not safe to be consumed. Following the product name should be words such as Caution, Danger or Warning to warn the users immediately. These words can also indicate of how toxic the pesticide is.

If the products contain a DANGER sign along with a skull icon then it should be understood that the said products cannot be purchased commercially or by the public. They can only be used if the buyer has a license and insurance coverage.

It is important that the products used by pest control in Sydney are the right products that can eliminate specific pests. This list should be readily available on the label to avoid confusion.


Security System Suitable For The Elderly Population

Elderly people are not well-versed when it comes to technology. This does not mean that they cannot benefit from the safety and security provided by commercial security alarms and home security systems. The possibility of crimes happening around an elderly home is higher this is why it is essential for seniors to have a complete security system.

If you have an elderly in your family, leaving them at home on their own is not safe. It is best to invest in a home security system that will help ensure their safety and well-being while they are alone at home or if you are not at home with them. There are hundreds of security products in the market but the most important ones for seniors include security cameras, medical alert systems, home automation, remote control access, doorbell cameras, alarm systems and energy management.

Security cameras are important because convicted burglars have admitted that they tend to avoid properties that are equipped with such. This is one of the best reasons why you should install one for an elderly home. Having security cameras will also ensure that real time monitoring can be done. Children who are living far from their parents’ home will be able to keep an eye on them through these cameras.

Medical alert systems are very important for an elderly because their health is not the same. Through this system, they will be attended to immediately in case they are not feeling well. These systems often comes with an accessory they can wear in order to trigger the alarm and notify assistance. Some are equipped with sensors that will be able to detect if the wearer fell down.

Home automation is important for an elderly because their memory is not as sharp as before. They tend to forget to lock doors and windows before going to sleep or when they leave the house. Control can be done remotely by other people or children that are far from home. These commercial security alarms will not only help an elderly in case of a crime but in other unfortunate incidents as well such as a fire or a carbon monoxide leak.


Qualities To Consider When Hiring Plasterers In Sydney

There are a lot of plasterers in Sydney that you can hire if you need a team who will renovate your home or office walls. While it may not be challenging to find a fit-out company, what may be challenging is finding a dependable one that delivers high quality service at a budget-friendly price. If you are going to hire plasterers or painters, choose those with the right qualifications such as trained workers with impressive skills. Here are some things to consider in hiring the right team:

Connected to a reputable company

You can find independent or private contractors but you can get more advantages if you are going to opt for those who are hired or connected to a reputable company in your area. This gives you the guarantee that you have somewhere to go to if you are not happy with the project output. You can easily file for complaints if you are not satisfied with the project and since companies are conscious of their name, you can be sure that your complaints would be attended to right away. Choose a company with proper licenses and one that has been in the business for over 25 years.

Delivers impressive output

If you want to get an idea how skilled the plasterers in Sydney are, take time to read customer feedback and testimonials found on the company’s website or from discussion boards online. You will also have an idea on the skills and craftsmanship of the plasterers by checking the company’s gallery.Find out the number of years the company has been in the business because this will give you an idea on the company’s expertise.

Professional in customer handling

One indication that you are dealing with professional plasterers in Sydney is the speed of their response to your queries or cost estimate request. The usual turnaround time of cost estimate is within 24 to 48 hours. Choose a company with excellent customer service representatives who are courteous and knowledgeable with their products and services. The plasterers should also arrive on time and should finish the project within the estimated time.